Home   |   About JH   |   Catalog   |   Sales Support   |   Technology
      Home > Catalog > Large type > CD293
ALUMINUM ELECTROLYTIC CAPACITOR
 
 CD293 SERIES

       

  • Load life 2000 hours at 85℃
  • High ripple current
  • Smaller size
  • PCB Mounting

　

  • SPECIFICATIONS
Item Characteristics
Operating Temperature Range(℃) -40~+85(450WV:-25~+85)
Capacitance Tolerance(20℃,120Hz) ±20%
Leakage current(μA) 0.01CV or 1.5mA whichever is smaller(at 25℃ ,after 5 minutes)
C:Nominal Capacitance(μF) V:Rated Voltage(V)
Dissipation Factor(25℃,120Hz)
Rated voltage(v)

Cap(μF)　

  10-16 25 35-50 63 80-100
2700 - - 0.20 0.15 0.15
3300-4700 - 0.35 0.25 0.20 0.15
5600-6800 0.40 0.35 0.30 0.20 0.20
8200 0.40 0.35 0.35 0.25 　
Rated voltage(v)

ΦD(mm)

 160-200 250-500
22-30 0.10 0.15
35 0.12 0.15
Temperature Stability(120Hz)
Rated voltage(v) 10 16-35 50-100 160-200 250-400 450~500
Impedance Ratio Z-25℃/Z+20℃ 5 4 3 3 4 4
Z-40℃/Z+20℃ 18 15 10 6 8 　
Load Life(+85℃)
Time 2000 hours
Leakage Current Not more than the specified value.
Capacitance Change Within ±20% of the initial value.
Dissipation Factor Not more than 200% of the specified value.
Shelf Life(+85℃)
Time 1000 hours
Leakage Current Not more than the specified value.
Capacitance Change Within ±15% of the initial value.
Dissipation Factor Not more than 200% of the specified value.

After test:UR to be applied for 60 minutes, 24 to 48 hours before measurement.

 
  • DIMENSIONS                              mm 
  • MULTIPLIER FOR RIPPLE CURRENT

　

 

Frequency coefficient

Frequency(Hz)

Rated Voltage(V)

50 120 1K 10K 100K
≦50 0.95 1 1.10 1.15 1.15
63~100 0.95 1 1.16 1.30 1.33
≧160 0.95 1 1.20 1.50 1.55

Temperature coefficient

Temperature(℃)

Rated voltage(V)

+40 +55 +70 +85
<160 2.1 1.8 1.5 1
≧160 1.7 1.5 1.3 1
  • STANDARD RATINGS
  WV(V) 10 16 25 35 50 63 80 100
Cap Ripple Cap Ripple Cap Ripple Cap Ripple Cap Ripple Cap Ripple Cap Ripple Cap Ripple
ΦDxl(mm)  
μF Arms μF Arms μF Arms μF Arms μF Arms μF Arms μF Arms μF Arms
22x25 10000 2.5 8200 2.2 5600 2.0 3300 1.8 2200 1.7 1500 1.6 1000 1.3 680 1.1
22x30 15000 3.2 10000 2.6 6800 2.3 3900 2.1 2700 1.9 2200 2.0 1200 1.5 820 1.2
22x35 18000 3.6 12000 2.9 8200 2.6 5600 2.3 3900 2.1 2700 2.2 1800 1.9 1200 1.6
22x40 22000 4.0 15000 3.3 10000 2.9 6800 2.9 4700 2.4 3300 2.3 2200 2.1 1500 1.8
22x45 - - 18000 3.8 12000 3.3 - - - - 3900 2.5 - - - -
22x50 - - 22000 4.2 - - 8200 2.8 5600 2.5 - - 2700 2.5 1800 2.1
25x25 15000 3.1 10000 2.6 6800 2.3 4700 2.2 2700 1.9 2200 2.0 1500 1.7 1000 1.4
25x30 18000 3.6 15000 3.3 10000 2.8 5600 2.3 3900 2.1 2700 2.3 1800 1.9 1200 1.6
25x35 22000 4.1 18000 3.7 12000 3.2 6800 2.6 4700 2.4 3300 2.3 2200 2.2 1500 1.7
25x40 - - 22000 4.2 15000 3.7 8200 2.8 5600 2.5 3900 2.6 2700 2.5 1800 2.0
25x45 - - - - - - 10000 3.1 6800 2.8 5600 3.1 3300 2.8 2200 2.2
25x50 - - - - 18000 4.3 12000 3.5 8200 3.2 - - 3900 3.1 2700 2.6
30x25 22000 4.1 15000 3.4 10000 3.0 6800 2.7 3900 2.4 3300 2.3 2200 2.2 1500 1.8
30x30 - - 22000 4.2 12000 3.4 8200 2.8 5600 2.5 3900 2.6 2700 2.5 1800 2.1
30x35 - - - - 18000 4.2 10000 3.2 6800 2.8 5600 3.2 3300 2.8 2200 2.3
30x40 - - - - 22000 4.8 12000 3.5 8200 3.0 6800 3.6 3900 3.2 2700 2.7
30x45 - - - - - - 15000 4.1 10000 3.4 - - 4700 3.6 3300 3.0
30x50 - - - - - - 18000 4.6 12000 3.8 8200 3.7 5600 3.5 3900 3.4
35x25 - - 22000 4.4 15000 3.9 8200 2.9 5600 2.6 3900 2.7 2700 2.5 1800 2.2
35x30 - - - - 18000 4.4 12000 3.6 8200 3.0 5600 3.3 3900 3.2 2200 2.5
35x35 - - - - 22000 5.0 15000 4.1 10000 3.4 6800 3.7 4700 3.6 3300 3.1
35x40 - - - - - - 18000 4.7 12000 3.8 8200 3.8 5600 3.5 3900 3.4
35x45 - - - - - - 22000 5.3 - - 10000 4.3 - - - -
35x50 - - - - - - - - 15000 4.5 12000 4.8 6800 4.1 4700 4.0

　

  WV(V) 160 180 200 250 315 350 400 450 500
Cap Ripple Cap Ripple Cap Ripple Cap Ripple Cap Ripple Cap Ripple Cap Ripple Cap Ripple Cap Ripple
ΦDxl(mm)  
μF Arms μF Arms μF Arms μF Arms μF Arms μF Arms μF Arms μF Arms μF Arms
22x25 330 1.3 270 1.2 220 11 180 0.94 100 0.67 82 0.64 68 0.55 - - - -
22x30 390 1.5 330 1.4 330 1.4 220 1.1 150 0.85 120 0.82 100 0.70 68 0.57 - -
22x35 560 1.9 470 1.7 390 1.6 270 1.2 180 0.96 150 0.94 120 0.79 100 0.72 - -
22x40 680 2.1 560 1.9 470 1.8 330 1.4 220 1.1 180 1.1 150 0.90 120 0.80 - -
22x45 - - - - 560 2.0 390 1.6 270 1.2 220 1.2 180 1.0 - - - -
22x50 820 2.5 680 2.3 - - 470 1.8 - - - - 220 1.1 150 0.95 - -
25x25 390 1.5 390 1.5 330 1.4 220 1.1 150 0.85 120 0.81 100 0.70 - - - -
25x30 560 1.9 470 1.7 390 1.6 300 1.4 180 0.96 150 0.94 150 0.89 100 0.73 - -
25x35 680 2.2 560 2.0 560 2.0 390 1.6 220 1.1 220 1.2 180 1.0