| Item |
Characteristics |
| Operating
Temperature Range(℃) |
-55~+105 |
| Rated
Voltage Range(V) |
6.3~100 |
| Capacitance
Range(μF) |
0.47~15000
|
| Capacitance
Tolerance(20℃,120Hz) |
±20%
|
| Leakage
current(μA) |
0.02CV
or 3 whichever is greater (at 20℃,after 2 minutes)
C:Nominal Capacitance (μF) V:Rated Voltage(V) |
| Dissipation
Factor(20℃,120Hz) |
| Rated
Voltage(V) |
6.3 |
10 |
16 |
25 |
35 |
50 |
63 |
100 |
| tanδ |
0.22 |
0.19 |
0.16 |
0.14 |
0.12 |
0.10 |
0.09 |
0.08 |
when nominal capacitance
is over 1000uF tanδ shall be added 0.02 to the listed
value with increase of every 1000 uF
|
| Characterislics
of Low Temperature |
Impedance
at +10℃ 100KHz<200% of initial specified value at +20℃
,100KHz(Impedance ratio at 100KHz) |
| Load
Life(105℃) |
After
life test at condition stated in the tble below, the capacitors
shall meet the following requirement.
| Case
Dia |
Test
time(hrs) |
| ΦD≤8 |
1000 |
| ΦD>8 |
2000 |
Ripple current applied
| Leakage
Current |
Not
more than the specified value. |
| Capacitance
Change |
within
±20% of the initial value. |
| Dissipation
Factor |
Not
more than 200% of the specified value. |
|
| Shelf
Life(105℃) |
1000hours. No
voltage appiled. After test:UR to be applied
for 30 minutes,24 to 48 hours before measurement.
|